Olympic to Standard Weight Plate Adapter Sleeves Barbell Dumbell 2in 1in 1.15in

Description

These are 3D printed weight plate adapters and sleeves to adapt an Olympic center weight plate down to the versions of standard, before ordering please measure the weight plates you want to adapt and the dumbbell or barbell you are planing to place them on, some standard equipment is 1in (25 mm) and others are 1.15in (30 mm) I offer both because I want these to fit snuggle on your equipment. I can make these to fit any width you have for weight plates, since they vary so much. These are Printed in ABS and not PLA, so they are stronger and great for outdoor applications as well. Throw them around doesn't matter they should hold up fine. If you want the sleeve measure the length you need and make sure to subtract the spindle nut or collar that will hold the sleeve in place from that measurement. The OD(outside Diameter) of all of these is 1.97inch or 50mm the width in the drop down menu is for how wide or long you want the adapter, ie. a weight plate that's 2 inch wide order the 2inch wide adapter.
Video on how to measure these adapters https://odysee.com/@GreenHornMotorSports:8/how-to-mount-olympic-weight-plates-to-a:8
If you need a size not listed shoot me a message and I will work with you!
All orders come in a pair of adapters and matching washers for the other side as pictured.